SELECTIONS: Products : SPARE PARTS

Results: 1-10   11-20   21-30   31-40   41-43  

  GAU-0000
Gauge Shock Boot for 2.5" gauges
List Price: $7.50
Our Price: $4.50
You Save: $3.00


Rubber shock boot will protect fragile internal parts from damage if dropped on the ground. Dry gauges are especially suseptible to damage if jarred or dropped. Liquid gauges are prone to leaking if the case is dented and damaged. Protect them with this boot and extend the life and accuracy of your gauges. This boot will fit our SIG-5600 shock inflator gauge and our tire inflator gauges. ...
  GAU-2160
Gauge, panel, 160 PSI
List Price: $30.00
Our Price: $26.00
You Save: $4.00


Panel gauges have a bracket in the back that secures it to a sheet metal dash. This one is 1.5" diameter and the back stem thread is 1/8 NPT. 0-160 PSI. Great for ARB line pressure, air bag pressures, Lovell T-case pressures, etc....
  GAU-2200
Gauge, panel, 200 PSI
List Price: $32.00
Our Price: $26.00
You Save: $6.00


Panel gauges have a bracket in the back that secures it to a sheet metal dash. This one is 1.5" diameter and the back stem thread is 1/8 NPT. 0-200 PSI. Great for ARB line pressure, air bag pressures, Lovell T-case pressures, etc....
  GAU-2300
Gauge, Panel, 300 PSI
List Price: $32.00
Our Price: $26.00
You Save: $6.00


Panel gauges have a bracket in the back that secures it to a sheet metal dash. This one is 1.5" diameter and the back stem thread is 1/8 NPT. 0-300 PSI. Great for ARB line pressure, air bag pressures, Lovell T-case pressures, etc....
  Gauge, 500 PSI, liquid, 2.5"
Gauge, SIG-5600, 500 PSI, liquid, 2.5"
List Price: $48.96
Our Price: $30.00
You Save: $18.96


Here is the 0-500 PSI gauge that is used on our SIG-5600 shock filler tool. The case is polished stainless steel. It is liquid filled for long life and accuracy. For maximum longevity get the rubber boot for it. 2.5" diamter. Lower 1/4" NPT stem. ...
  HSE-6063
Hose end swivel fitting assembly
List Price: $9.94
Our Price: $7.95
You Save: $1.99


Our hose end swivel fittings are top-of-the-line. They are nickel plated for corrosion resistance. The amazing thing is that they are rated to 1200 PSI and -60*F. They are easy to install on any hose with 1/4" ID and 3/8" OD. The rigid plastic strain relief looks good and keeps the hose from kinking when pulled sideways. Note, you will need a 3/4" compression fitting wrench to tighten or you may strip the plastic hex...
  KIT-8100
Mini Tire Plug Kit
List Price: $10.00
Our Price: $7.50
You Save: $2.50


Have you ever picked up a nail in your tire and sat on the side of the road for an hour waiting for a stupid tow truck? I once paid a punk at a gas station $20 to plug a nail hole in my car which took him all of 10 minutes and that's because he was going slow. After I witnessed this I've plugged at least a dozen tires for myself and others. Half of these...
  CHK-8041
Monster Valve Chuck with Valve
List Price: $62.44
Our Price: $49.95
You Save: $12.49


Monster chuck with Valve fits our large bore Monster Valves. The on/off ball valve gives you control at the valve and also shuts air off during chuck install for much easier push on and locking. ...
  CO2-5000
Never Lose Seal
List Price: $1.25
Our Price: $1.00
You Save: $0.25


When installing your Power Tank regulator onto your tank valve you will notice that the flat end surface of the valve mates up to a flat surface inside the regulator attachment nut. Between these surfaces lies a flat seal which stays with the nut, hense the name "never lose". This seal will age and crack over time (usually years) and will leak. Do not overtighten this nut. The torque spec is 10-20 ft/lb (two finger). ...
  VLV-5003
Pin Valve Adapter for 323 Valves
Our Price: $23.00

This item is used to open and close the pin valve of a paintball style bottle with "pin valve". The adpater has one 1/8 NPT outlet port. The way it works is it used a screw with a knob that turns down to depress the valve pin letting air out. Turn the knob out and the pin valve closes shutting off the air. Note: bottle pressure may be over 2000 psi so all components attached...



Results: 1-10   11-20   21-30   31-40   41-43  
 
 
Home | About Us | Events | Charts / Specs | Team PT | Mounting Ideas | Powertank Sightings | FAQ's | Dealers | Contact Us | View Cart
© 2005 Power Tank. All rights reserved.