The Monster Valve Wedge (or MV-Wedge, formerly MV3) packs incredible inflation and deflation speeds with a foolproof install process. Monster Valves are over sized, light-weight, yet strong valve stems that you install as a second stem to your wheel. Made from 7018 aluminum, they are the fastest tire deflation and inflation product on the market.
Imagine airing down a 40"x13.5"x17" tire from 35 psi down to 10 psi in under 30 sec.. This kit also includes a Monster Chuck which, when used with a Power Tank, will inflate that same tire in 45 sec.
They are easy to install into steel or aluminum wheels. Just drill a 1/2" hole and tighten them from the back using the Monster Key included with every four or five pack kit. Unlike the Monster Valve 1, these can not be installed with the tire mounted but, because you do not need to tap your wheel, the install is much easier.
With an all aluminum construction the total weight of each valve is a mere 1.6 oz. and does not require a tire rebalancing. Due to its construction, it is 5 times stiffer than a standard metal valve.
We recommend adding a tire pressure gauge with a large, easy to read face to get accurate readings while you're airing up and down. You'll thank yourself when you see how quickly the pressure drops.
Save 10% on a tire pressure gauge when you bundle with your monster valves! We recommend adding a Tire Pressure Gauge (TPG) with a large, easy to read face to get accurate readings while you're airing up and down. You'll thank yourself when you see how quickly the pressure drops. If you option your Monster Valves with a TPG, we'll include a free EVA Case! ($22 value)
- 7018 Aluminum body
- Aluminum Collar and Cap
- Sold as set of 4 or 5
- Monster Chuck included for inflating
- Single Monster Valves can be found in a separate listing
- Monster Key used for install is included
- Add a Tire Pressure Gauge and we'll include a free EVA case! ($22 value)
User Note: When finished airing down, screw the red collar down until air flow stops or screw down fully and back out 1/8-1/4 rotation to properly seat the o-ring and prevent leaks.https://www.youtube.com/embed/OZ_dXxviD3E?rel=0