Single Monster Valve™ Flat2 - Tire Deflator Power Tank
Monster Valve™ Tire Deflator from Power Tank. Monster Valve™ are over sized, light-weight, yet strong valve stems that you install as a second stem to your wheel. Made from 7018 aluminum, they are the fastest tire deflation and inflation product on the market.
Imagine airing down a 40"x13.5"x17" tire from 35 psi down to 10 psi in under 30 sec. This kit also includes a Monster Chuck which, when used with a Power Tank, will inflate that same tire in 50-60 sec.
These Monster Valve™ have been designed to fit directly into KMC Beadlock wheels with dual valve stems. You must remove your tire from the wheel before installing.
With an aluminum body and collar and brass cap the total weight of each valve is a mere 1.1 oz. and does not require a tire rebalancing. Due to its construction it is 5 times stiffer than a standard metal valve.
This is intended as a spare and does not include the installation Monster Key or a Monster Chuck.
Details:
- 7018 Aluminum body
- Aluminum Collar
- Aluminum Dust Cap
Warranty void if used with balancing beads.
Pair with a Monster Tire Inflator Gauge
All Ventoso RED Tire Inflator Gauges can connect to your Monster Chuck
All Power Tank Tire Inflator Gauges (regardless of age) can be upgrade with the RED coupler
Nothing Faster
These high-flow valve stems can air down a 37 in tire in just 20 seconds and airing up with a Power Tank is even faster! (35 psi to 15 psi)
No other valve stem comes close when it comes to speed and performance.
Leave the Air Squid at home
Maximize the flow of any air source into a single tire saving the laborious setup and put away of four-way hose systems.
A single Monster Valve has a similar flow-rate to four Schrader valves, eliminating the worry of building back-pressure and damaging your high-output dual compressor.
See the lineup
Monster Valve™ Fit Kit
Not sure if Monster Valves will fit your wheel? The Monster Valve Fit Kit is a toolkit used to test fit all the different MV styles to determine compatibility.
Monster Valve Gallery
Frequently Asked Questions
We can not test every wheel from every wheel manufacturer. Wheels that look the same may have different off-sets and spacings. The best thing to do is purchase the Monster Valve Fit Kit so you can try multiple variations before committing to any one Monster Valve style.
We give you the tools and have simplified the process as much as possible, including the tap-in style. If you can confidently drill a hole, you can drill and tap for a Monster Valve.
Despite this, we know the process can seem intimidating. Call your local independent off-road or fabrication business.
Yes. If you are installing a Monster Valve as a secondary valve stem, you will keep the TPMS on the existing stock Schrader valve stem.
If you are installing a Monster Valve as your only valve stem, we provide a TPMS bracket to reuse your factory TPMS sensor. Some vehicles may require aftermarket TPMS sensors.
Lifetime Service
Everything is rebuildable whether or not is within warranty. We want to know if you're having trouble and will come up with a solution to help! P: 209-366-2163 info@powertank.com
Full transparency - Prior Monster Valves had a "sweet spot" and screwing the Red Collar down too far caused the O-Rings to not seat properly and we could have been more clear in our instructions.
We have addressed this issue and all Monster Valves now have a Red Collar that is fool-proof.